Straight Raw Selvage Jean In Indigo

HOW TO MEASURE
Button the jean up and lay flat to take measurements. Jean fits and measurements vary by company, compare these measurements to a similar pair of jeans you own to get a general idea of fit.

Note: There are standard tolerances in the apparel industry, and our line is cut and sewn by hand and getting exact numbers is impossible. The standard industry tolerance ranges from 0" to +/-1/2".

WAIST (A)
With the waistband buttoned, measure from side to side along the top edge of the jean. The front and back should be parallel, and the front should not be dipping down. Doubled this amount to determine the total waist measurement.

FRONT RISE (B)
Measure from the crotch point seam to the top of the waistband; this is the front rise measurement.

THIGH (C)
Measure 1" down from crotch point seam straight across the leg. Doubled this amount to determine the thigh measurements.

KNEE (D)
Measure 13" down from crotch point. Measure Straight across edge to edge. Doubled this amount to determine the knee measurement.

INSEAM (E) 
Measure from the crotch point, where the leg inseam meets the bottom of the crotch seam, to the hem or leg opening, following the seam all the way down; this is the inseam measurement.

HEM (F)
Measure straight across the opening from side to side along the bottom edge. Doubled this amount to determine the total measurements; this is the hem or leg opening measurement.

BACK RISE (G)
Measure from the crotch point seam to the top of the waistband; this is the back rise measurement.

If you have sizing or fit questions reach out to us at Hello@HornJeans.com and we will assist you.